[Docs] [txt|pdf|xml|html] [Tracker] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01

Network Working Group                                        A. Melnikov
Internet-Draft                                                 Isode Ltd
Intended status: Standards Track                           July 13, 2020
Expires: January 14, 2021


      Extensions to Salted Challenge Response (SCRAM) for 2 factor
                             authentication
                      draft-melnikov-scram-2fa-01

Abstract

   This specification describes an extension to family of Simple
   Authentication and Security Layer (SASL; RFC 4422) authentication
   mechanisms called the Salted Challenge Response Authentication
   Mechanism (SCRAM), which provides support for 2 factor
   authentication.

   This specification also gives an example how TOTP (RFC 6238) can be
   used as the second factor.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on January 14, 2021.

Copyright Notice

   Copyright (c) 2020 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect



Melnikov                Expires January 14, 2021                [Page 1]


Internet-Draft            SCRAM 2FA extensions                 July 2020


   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Conventions Used in This Document . . . . . . . . . . . . . .   2
   2.1.  Terminology . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.2.  Notation  . . . . . . . . . . . . . . . . . . . . . . . . .   3
   3.  SCRAM Extension for 2FA . . . . . . . . . . . . . . . . . . .   3
   4.  Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . .   4
   5.  Use of TOTP with SCRAM  . . . . . . . . . . . . . . . . . . .   4
   6.  Examples  . . . . . . . . . . . . . . . . . . . . . . . . . .   5
   7.  Open Issues . . . . . . . . . . . . . . . . . . . . . . . . .   5
   8.  Security Considerations . . . . . . . . . . . . . . . . . . .   5
   9.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   5
   10. Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .   5
   11. Normative References  . . . . . . . . . . . . . . . . . . . .   6
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .   6

1.  Introduction

   SCRAM [RFC5802] is a password based SASL [RFC4422] authentication
   mechanism that provides (among other things) mutual authentication
   and binding to an external security layer such as TLS.

   Two-factor authentication (2FA) is a way to add additional security
   to an authentication exchange.  The first "factor" is a password.
   The second "factor" is a verification code retrieved from an
   application on a mobile device or computer.  2FA is conceptually
   similar to a security token device that banks in some countries
   require for online banking.  Other names for 2FA systems include OTP
   (one-time password) and TOTP (Time-based One-time Password algorithm,
   such as [RFC6238]).

   This specification describes an extension to SCRAM to provide 2
   factor authentication.  SCRAM already relies on passwords for
   authentication.  This document specifies how second "factors" can be
   incorporated into SCRAM authentication.

2.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].




Melnikov                Expires January 14, 2021                [Page 2]


Internet-Draft            SCRAM 2FA extensions                 July 2020


   Formal syntax is defined by [RFC5234] including the core rules
   defined in Appendix B of [RFC5234].

   Example lines prefaced by "C:" are sent by the client and ones
   prefaced by "S:" by the server.  If a single "C:" or "S:" label
   applies to multiple lines, then the line breaks between those lines
   are for editorial clarity only, and are not part of the actual
   protocol exchange.

2.1.  Terminology

   This document uses several terms defined in [RFC4949] ("Internet
   Security Glossary") including the following: authentication,
   authentication exchange, authentication information, brute force,
   challenge-response, cryptographic hash function, dictionary attack,
   eavesdropping, hash result, keyed hash, man-in-the-middle, nonce,
   one-way encryption function, password, replay attack and salt.
   Readers not familiar with these terms should use that glossary as a
   reference.  Other terms defined in [RFC5802] are also used in this
   document.

2.2.  Notation

   This document reuses notation defined in SCRAM.

3.  SCRAM Extension for 2FA

   This extension doesn't add any extra roundtrips to SCRAM
   authentication.  SCRAM was designed to be extensible, so it allows
   for optional and mandatory attributes, which covered by MAC codes.
   Second "factors" are conveyed in the second message sent from the
   client to the server.

   This extension doesn't change how the client authenticates the
   server.

   The server authenticates the client after receiving the second
   message as described in Section 3 of [RFC5802] If the client included
   "type" and "second-factor" attributes (see Section 4) and the server
   supports the specified second factor type, the server verifies
   content of the "second-factor" according to the "type".  If the
   second factor verification fails, the server MUST fail authentication
   and SHOULD return "second-factor-failed" error in the "e" attribute.
   [[It would be possible to make the extra attributes mandatory by
   using SCRAM's "m=", but the text above doesn't do that.]]






Melnikov                Expires January 14, 2021                [Page 3]


Internet-Draft            SCRAM 2FA extensions                 July 2020


4.  Formal Syntax

   This document defines the following SCRAM attributes:

   o  t: This attribute specifies the type of second factor.  (Create
      IANA registry for these?)  This document defines one type: "otp".
      If this attribute is specified, the "f" attribute MUST also be
      specified.

   o  f: This attribute specifies the value of the second factor.  For
      "t=otp" it is 6 digit decimal number.  This attribute MUST be
      ignored unless the "t" attribute is also specified.

   The following syntax specification uses the Augmented Backus-Naur
   Form (ABNF) notation as specified in [RFC5234].


      type            = "t=" type-value
                    ; Complies with "attr-val" syntax.
      type-value      = "otp" / value
                    ; Type of second factor.
                    ; Should be registered with IANA.
      second-factor   = "f=" second-factor-value
                    ; Complies with "attr-val" syntax.
      second-factor-value = 6DIGIT / value

      server-error-value-ext =
              "second-factor-failed" /
              "second-factor-value-missing"

      value = <as defined in RFC 5802>


5.  Use of TOTP with SCRAM

   This document defines the following SCRAM attributes:

   o  t: This attribute specifies the type of second factor.  (Create
      IANA registry for these?)  This document defines one type: "otp".
      If this attribute is specified, the "f" attribute MUST also be
      specified.

   o  f: This attribute specifies the value of the second factor.  For
      "t=otp" it is 6 digit decimal number.  This attribute MUST be
      ignored unless the "t" attribute is also specified.

   A TOTP URI is specified with the following ABNF:




Melnikov                Expires January 14, 2021                [Page 4]


Internet-Draft            SCRAM 2FA extensions                 July 2020


totp-uri = "otpauth" "://" "totp/" label "?secret=" secret "&issuer=" issuer
label = issuer (":" / "%3A") identity
identity = 1*CHAR ; URI-encoded SASL identity
secret = 40 * HEXCHAR ; Base32 (hex) encoded secret with no padding.
issuer = 1*CHAR ; Issuer name.


6.  Examples

   The following example extends the example from Section 5 of
   [RFC5802]:


     C: n,,n=user,r=fyko+d2lbbFgONRv9qkxdawL
     S: r=fyko+d2lbbFgONRv9qkxdawL3rfcNHYJY1ZVvWVs7j,s=QSXCR+Q6sek8bf92,
        i=4096
     C: c=biws,r=fyko+d2lbbFgONRv9qkxdawL3rfcNHYJY1ZVvWVs7j,
        t=totp,f=776804,
            p=v0X8v3Bz2T0CJGbJQyF0X+HI4Ts=
     S: v=lz59pqV8S7suAoZWja4dJRkFsKQ=


7.  Open Issues

   Simon Josefsson: should this be a new SASL mechanism name, e.g.
   SCRAM-SHA-1-TOTP?

   Simon Josefsson: cookie option for fast reauthentication?  Alexey:
   can do or just used CLIENT-KEY (draft-cridland-kitten-clientkey)?

8.  Security Considerations

   TBD

9.  IANA Considerations

   TBD.  Possibly create a new registry of second factor types.

10.  Acknowledgements

   Thank you to Stephen Farrell for motivating creation of this document
   and to Dave Cridland for describing how TOTP can be used with XMPP in
   XEP-400.








Melnikov                Expires January 14, 2021                [Page 5]


Internet-Draft            SCRAM 2FA extensions                 July 2020


11.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC4422]  Melnikov, A., Ed. and K. Zeilenga, Ed., "Simple
              Authentication and Security Layer (SASL)", RFC 4422,
              DOI 10.17487/RFC4422, June 2006,
              <https://www.rfc-editor.org/info/rfc4422>.

   [RFC4949]  Shirey, R., "Internet Security Glossary, Version 2",
              FYI 36, RFC 4949, DOI 10.17487/RFC4949, August 2007,
              <https://www.rfc-editor.org/info/rfc4949>.

   [RFC5234]  Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", STD 68, RFC 5234,
              DOI 10.17487/RFC5234, January 2008,
              <https://www.rfc-editor.org/info/rfc5234>.

   [RFC5802]  Newman, C., Menon-Sen, A., Melnikov, A., and N. Williams,
              "Salted Challenge Response Authentication Mechanism
              (SCRAM) SASL and GSS-API Mechanisms", RFC 5802,
              DOI 10.17487/RFC5802, July 2010,
              <https://www.rfc-editor.org/info/rfc5802>.

   [RFC6238]  M'Raihi, D., Machani, S., Pei, M., and J. Rydell, "TOTP:
              Time-Based One-Time Password Algorithm", RFC 6238,
              DOI 10.17487/RFC6238, May 2011,
              <https://www.rfc-editor.org/info/rfc6238>.

Author's Address

   Alexey Melnikov
   Isode Ltd

   Email: Alexey.Melnikov@isode.com













Melnikov                Expires January 14, 2021                [Page 6]


Html markup produced by rfcmarkup 1.129d, available from https://tools.ietf.org/tools/rfcmarkup/